RF coaxial connector adapter hmang hian RF signal chu frequency range zau tak, 50 GHz leh a aia sang thlenga thawn chhuah theih a ni. Radar, communication, data transmission, leh aerospace hmanruaah te an hmang ber a ni.
Coaxial adapter siam dan bulpui ber chu center conductor, dielectric material (insulator an ti bawk), leh outer conductor (coaxial cable pawn lam shield ang maia thawk) te a ni.
Coaxial adapter hi a bik takin: 1.0mm, 1.85mm, 2.4mm, 2.92mm, 3.5mm, SSMA, SMA, SSMP, SMP, N, TNC, leh TNCA te hi a ni. Adapter sawifiahna atana thumal bulpui ber berte:
1: Connector chi-eg, SMA, 3.5mm, N-type
2: Contact chi-mipa (J/M), hmeichhia (K, F) .
3: Characteristic impedance-Connector impedance hi a tlangpuiin 50Ω emaw 75Ω emaw anga then a ni.
Adapter dil hunah heng thil tul pathumte hi a tlin phawt chuan i mamawh chu i hre vek ang:
N/3.5-JK adapter mamawh a ni:
Hetiang hian sawifiah rawh: A tawp khatah N-type male connector leh a tawp dangah 3.5mm female connector nei 50Ω impedance adapter mamawh-harsatna a awm lo.
Price point hrang hrang hian adapter grade hrang hrang a tarlang tlangpui.
A tlangpuiin man hi quality sang zawk nen a inang niin kan ngai a, mahse hei hi evaluation criterion kimchang tak a ni lo. Adapter hi grade thum a awm a, pakhat hian application requirement inang tlang tak a entir a ni.
Metrology Grade: Connector grade zawng zawng zingah metrology grade hian performance sang ber a pe a, mahse a man pawh a to ber bawk.
A bik takin calibration standard, performance verification standard, leh precision connection mamawh application atan hman a ni.
Features: Performance sang tak, slotless connection design, tight tolerances, leh long life, mahse production cost sang tak a ni bawk.
He grade connector hian dimension dik ber leh tolerance tight ber ber a pe a, connection cycle repeated pawh a tuar thei a, chu chuan grade zawng zawng zingah a dam rei ber a ni.
Instrument-grade connector hi a tlangpuiin "intermediate-grade" connector anga ngaih a ni.
Instrument input leh output interface leh economical calibration component thenkhat atan an hmang ber a ni.
Features: Performance sang tak, tight tolerances, leh non-conductive interfaces support te, chu chuan dam rei tak a siam a ni.
Test performance tha zawk leh tolerance khauh zawk an pe bawk. Metrology-grade adapter nena khaikhin chuan instrument-grade adapter thenkhat chu metrology-grade connector nen a inmil tawk lo thei a, a chhan chu non-conductive media tan interface an hmang thei a ni.
Production-grade adapter hi test product-ah hman a ni tlangpui. An tolerance zau zawk avangin he grade-a connector-te performance hi a hmaa chi hnih aiin a hniam zawk a ni.